MICRO CAT 5 BOOSTER SET

UP TO 60 LITRES PER MINUTE

PRESSURE UP TO 10 BAR

CHAMBER CAPACITY OF 67 LITRES

Variable speed inverter

wras approved
single pump icon
uk built

Description

The CAT 5 Micro system is a combined break tank and end suction booster which has been designed for category 5 applications.

The booster set is free standing and has a small surface footprint. The system comes complete with an integrated pressure controller which is mounted directly to the top of the pump.

The tank is constructed from MDPE with a CAT 5 ‘AB’ air gap complete with an equilibrium inlet float valve. The system also features low level protection as well as common volt fault-free contact.

product features

  • 67 litre capacity
  • WRAS approved pump
  • 1 Year warranty (terms apply)
  • MDPE tank
  • Cat 5 AB air gap
  • Low level protection
  • Electronic pressure controller

product downloads

MICRO CAT 5 BROCHURE

Click Here

MICRO CAT 5 SPECIFICATIONS

Model RefDN1DN2HH1H2LPower SupplykWHPFLC (amp)
1RS302/8DPT1”1”700803103601x240v0.450.62.3
1RS305/8DPT1”1”700803104081x240v0.751.03.0
1RS306/8DPT1”1”700803104441x240v0.91.24.3
1RS307/8DPT1”1”700803105181x240v1.31.85.6
1RS308/8DPT1”1”700803105421x240v1.31.85.6
1RS502/8DPT1¼”1”700803103601x240v0.450.62.3
1RS505/9DPT1¼”1”700803104701x240v1.31.85.6
1RS506/8DPT1¼”1”700803104981x240v1.31.85.6
1RS507/8DPT1¼”1”700803105191x240v1.52.06.3
1RS508/8DPT1¼”1”700803105431x240v2.23.08.2
1RS1002/8DPT1½”1¼”700803103791x240v0.751.03.0
1RS1003/8DPT1½”1¼”700803104411x240v1.31.85.6
1RS1004/8DPT1½”1¼”700803104721x240v1.52.06.3
1RS1005/8DPT1½”1¼”700803105021x240v2.23.08.2
1RS1006/8DPT1½”1¼”700803105321X240V2.23.08.2

contact us now with your requirements

your requirements

Please fill out the form below so we can accurately quote for your system requirements.

Why do we need this information?

For us to be able to calculate a booster set correctly we need to understand the number of outlets in your property that will be drawing pressure from the system. Once we have this information we can then calculate the number of “Loading Units” required required for your system. from here we can then determine the total pressure and litres per minute your booster set will need to deliver.

Alternatively, if you want to take a look at some of the most commonly asked questions then you can check out our FAQ’s below.

Booster set faq's